The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] IT Solder  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Peter W . Rowe
Date: Sun May 02 18:59:59 2004
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>        On jump rings, when you close the join, mark the spot with a
>     permanent black ink pen.  After pickling, you can easily find the
>     spot for soldering. 

    Remembering that pickling only removes surface oxides, and has no
    other cleaning action, why would you pickle your jump rings after
    closing them, before soldering?  Normally, one would expect the jump
    rings to be already clean before you close them, and closing them
    isn't going to change that.  They should be ready for soldering as
    soon as you close them.  You'd put some flux on the jump ring,
    protect the rest of the piece from fire scale if needed (prips flux,
    for example), and solder the ring.  THEN you pickle it.  Also, be a
    little careful of the black pen.  it will act as a solder resist, at
    least that portion that doesnt' burn off.  if you get the ink INTO
    the joint, the solder won't flow well there, as the residual carbon
    from the ink will block solder flow (and the initial ink application
    may reduce flux coverage too.)  If you mark the joint, it would be
    best to place the mark slightly to the side of the actual joint. 

Peter


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project