[Jewelry making - Article 00023] - Re: [Orchid] PUK 111 spot welder

[Mitchell Dickler]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Edward,

    I have been using the PUK 111 for about one month and had very good
    success with many applications as well as a couple of things that
    did not work. Jump rings are a breeze any thing that is a clean
    straight joint will work very well. Sometimes I have had to use some
    filler material to make a better weld. What kind of things do you
    want to do with the welder? I'm still learning with this machine
    every day so be patient. 

MITCH.


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________