[Jewelry making - Article 01146] - Re: [Orchid] Tap and die components

[KARAT46]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Tap & die sets are widely available a recent trend of Body Piercing
    has made them very common too. 

    An economy set from India sells of $18.00 & then you have Japanese,
    Swiss & German set go for about  $80 to a $1000 

    You may be able to buy individual pieces if you know what sizes you
    are looking for. If you find some make sure the thread sizes are
    what you are looking for. For example Threads for Watchmaking  much
    finer than jewelers. 

Regards  Kenneth Singh


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________