[Jewelry making - Article 00446] - Re: [Orchid] Hot Spot vs soldering machine

[Brian Barrett]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    There have been a few recent duscussions on soldering machines. The
    hot spot needs solder or solder filled wire. 2 other devices
    discussed were, the Tack III and PUK 111. Both are (TIG?) welders and
    use argon and leave a nice clean joint (according to manufactures
    documentation). Just thought you may want to look at those units to
    compare. 

Brian Barrett


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________