[Jewelry making - Article 00009] - Re: [Orchid] Brass for etching

[Michael Honeycutt]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I have frequently used brass shim stock  that I purchased from my
    local machine shop. They have their suppliers too and some of them
    will share the info. The stuff I've used came in sheets 6"x96" all
    rolled up like a spring that would just love to eat some thumb and
    finger pie, so open it carefully. I bought it in .010", .012". and
    .015" thicknesses. The .010 was very thin but worked well for small
    earring dangles. Those shops may hve more info to share. Mike 



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________