[Jewelry making - Article 01141] - Re: [Orchid] Watch Face Repair

[sbright]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Pam Somewhere near the stem is  a button (silver color usually)
    which you'll have to push while pulling on the stem.  Be precise as
    you really need three hands for this procedure.  Whatever you do,
    don't let your screwdrivers or tweezers touch the coil.  (Usually
    orange) Carefully remove the stem.  One word of caution-  there is a
    small gear which is used in the setting process which likes to get
    turned when the stem is out of the watch.  It used to happen to me
    all of the time when I was new to this. Once turned,, you'll have to
    remove the dial in order to get to it to fix it up.  Don't worry too
    much about it, it probably won't happen to you, just wanted to let
    you know. 

-Stanley


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________