[Jewelry making - Article 01103] - Re: [Orchid] Casting torch upgrade advice needed

[John A. Henkel]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    HI Jeff, Go to your local welding supply store where you get your
    oxy and other gases. See if they carry Victor torches. If they don't
    have them in stock see if they have a Victor catalogue. Look at the
    J-100 model. I bought mine 25 years ago as a kit with a cutting
    attachment (which I do use occasionally). It comes with a six hole
    rosebud tip that can be replaced as needed. You can get tips for
    acetylene or propane. All the Victor parts are replaceable, the
    balance is great and it's just the right weight. John, J.A.Henkel
    Co., Inc., Moldmaking Casting Finishing, Producing Solutions For
    Jewelry Artists. 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________