[Jewelry making - Article 00975] - Re: [Orchid] Repairing concave facets

[Rick Martin]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Hi Ann,

    This sounds like one of the snowflake cuts from Wobito Gems.  You
    might send them an inquiry to see if it's their cut -- I don't know
    of anyone else doing anything remotely similar.  They'd be the best
    people to do a repair or replacement.  Their URL is www.wobito.com 
    I've always considered this cut a bit on the fragile side and quite a
    challenge for creative designers. 

    If this approach doesn't yield results let me know and I may be able
    to recommend other options. 

Hope this helps.
Rick Martin
MARTIN DESIGNS


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________