[Jewelry making - Article 00707] - Re: [Orchid] Soldering jump rings that join two sheets

[Dave]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi David, It's difficult to say with any certainty that you won't
    have any problems without seeing the piece. However, if the piece
    can be laid on a firebrick or other soldering surface, you may be
    able to protect it from the heat of soldering with some small metal
    shields (pieces of old steel, not aluminum) beer can, use of 'easy'
    paste solder & judicious flame direction. 

Dave


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________