[Jewelry making - Article 00452] - Re: [Orchid] Graver max ?

[Sara Grinnell]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Phillip,

    Correct me if I am wrong, but I purchased the Micro Motor from Rio's
    Catalog in Motion a couple of years ago and it was sold to me as a
    helpful tool for bead setting and other setting techniques. It was
    packaged with the reciprocating handpiece, however, I would like to
    purchase a handpiece that I can use to drill, sand, and grind like
    you describe. I do no want to rebuy the motor or foot pedal, just
    the handpiece. Any ideas? I have called Rio on the matter and
    described what I have and they said they will only sell me the
    entire set-up again, with the alternate handpiece I desire. 

Sincerely,
Sara D. Grinnell
Studio C Designs


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________