[Jewelry making - Article 00389] - Re: [Orchid] Graver max ?

[kevdan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I have used both but i bought the cheap version of the graver max it
    costs about 300 dollars and uses a compressor I didnt like the
    foredome as much as the pneumatic graver you don't need a very large
    compressor to run it and you can use the compressor for a
    sandblasting cabinate and to pressurize a wax injector. The
    gravermax seems to work about the same as the inexpensive model I
    was told by a friend who is a professional engraver that the
    gravermax is the way to go because it has mor strokes per minute but
    I couldn't tell the difference all I use mine for is pave and bright
    cutting and it works great, you can push up big beads even in steal
    with no effort you have to let the tool do the work and you just
    guide it the temptation is to push it but it actually slows it down.
    hope this helps just my two cents worth. sincerely Kevin 



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________