[Jewelry making - Article 00311] - Re: [Orchid] Natural Gas - Actual Numbers

[Judy M. Willingham]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Hello Orchidland,

    I've been using NG for... hmmm, at least 15 years with no problems. A
    simple set-up with one torch.  No pressure regulator or booster
    needed, and the connection is through a hand valve to the NG line
    that feeds the water heater and furnace. 

    With standard safety precautions (close the hand valve when done for
    the session), NG is the 3Cs: clean, convenient, and cheap. Be
    confident; talk to your local welding supplier (who will be your
    source of compressed oxygen); it's not rocket surgery.<G> Judy in
    Kansas 

Judy M. Willingham, R.S.
B.A.E.  237 Seaton Hall
Kansas State University
Manhatttan  KS  66506
(785) 532-2936    FAX (785) 532-6944


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________