The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Permanent "Wite-Out"!  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: JoJu428
Date: Fri Mar 05 20:07:35 2004
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>         This is a great tip, and very timely, because it sounds as
>     though, if you rotate the wire, it would put a point on it -- like
>     for a pin. 

    Hi Noel, I found this a very quick way to create a long, round
    taper, and superior to filing. But let me caution you. You must
    secure the wire very well in the pin vice, and hold it firmly, less
    the rotating disc pulls the wire out of the vice and wraps it around
    the pin holding the facing abrasive discs. This is especially useful
    when trying to point a light gauge wire for drawing. If you want to
    point a heavier wire, such as a brooch pin or stick pin or to create
    a wire for riveting I generally use the following proceduRe: 1. Make
    a groove in the bench pin using a half round file with the flat
    surface of the file facing away from you. In that way you develop a
    vertical wall on the backside of the groove which will help
    stabilize the wire as you point it. 

    2. take the wire (not too long) and straighten it in the manner that
    best suits you. You can then chuck the wire into the handpiece, (be
    sure it is running true) and holding the handpiece in your left
    hand, rotate the wire slowly. Place the rotating wire into the
    groove, and holding a file on top of the wire begin filing as the
    wire rotates. I do hope this is clear, but if not contact me and
    I'll try to communicate a clearer description. Using this procedure I
    make a very graceful and elegant shepherd's hook as a closure.


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2007, The Ganoksin Project