[Jewelry making - Article 00131] - Re: [Orchid] Refinishing of steel surface plate tool

[kevdan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I have been making my own stakes and hammers, to get them to a
    mirror shine I file them then I use a large cratex unitizing wheel
    on my buffer to smooth out all of the file marks then I use a polish
    developed for steel I got some at a place that does chrome plating
    it is real aggresive I use a stitched cotton buff and then I use
    tripolee and rouge they come out so shiny I can hardly stand to use
    them they are like mirrors. Rio sells the unitizing wheels they are
    made by 3M and cost about 40 bucks, seems expensive but they work
    real fast and last a long time. Kevin


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________