[Jewelry making - Article 00080] - [Orchid] Silver Foil Dilemma

[Diane Russ]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi - I am curious whether anyone has had experience fusing or
    soldering silver foil to brass or copper mesh (or, alternatively,
    fusing or soldering copper foil to mesh). I've also heard that foil
    differs from one place to another (some is much thinner or thicker
    than others). I really want to try this but really don't know how to
    start. I need advice before experimenting. I have seen some pieces
    in the past that have incorporated this, so I know it can be done! 
    First-hand advice from experience? Books to consult? Thanks in
    advance! 

diane


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________