[Jewelry making - Article 00031] - Re: [Orchid] Permanent "Wite-Out"!

[Margaret Malm]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Noel I haven't run into that problem; we all use the water-based
    white-out. But the kind yor friend used apparently is the othe type. 
    Two things I would suggest trying:  

    1)  check the store and see if you can find a little bottle of
    whatever they sell to add to the white-out when it gets too thick
    (from sitting around so long the solvent evaporates).  

    2) If you can't find that, I should imagine about any of the common
    organic solvents would do the job. Acetone, for instance. Or
    fingernail polish remover. 

Margaret


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________