[Jewelry making - Article 01070] - Re: [Orchid] Soldering links

[TA Masters]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Janet, I recently saw and tried a method that hung the single link to
    be soldered off the end of a fire brick, or charcoal block. The next
    links are covered with White Out, found in any stationary store or
    similar. place the tweezers over the link with the white out and
    direct your flame only on the dangling link. Should work that way
    without involving the following links. Teresa 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________