[Jewelry making - Article 01065] - Re: [Orchid] Natural gas

[Kenneth Ferrell]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Kevin; I used a smith little torch on a natural gas line , I had
    previously used a Hoke which I was feeding 7 PSI but the smith
    worked better at lower pressures, I had more and easier adjustment. I
    just had Plumber turn down the regulator, I did have separate lines
    from my Meter to my heater and stove and water heater that were at I
    believe set at around 5 PSI . 

Kenneth Ferrell
www.shadras.com


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________