[Jewelry making - Article 00983] - Re: [Orchid] Joys of Snap on Sanding

[david piccoli]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    sanding discs and drums will work great on wax if run at a very low
    rpm, the finer the grit, the slower the revolutions must be,, very
    easy on the pedal, or low on the speed control,,,, or use them
    together to set a low top speed for pedal use.  But the scraping
    action of a knife blade is my first choice for either fast removal
    or ultra fine blending,, and much more sensual and fun,, with no wax
    dust. dp 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________