[Jewelry making - Article 00896] - Re: [Orchid] An American (Little Torch) in Paris

[Jeff Demand]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Trevor, While high quality dual stage regulators are recommended for
    the little torch I've had no problems using small commercial single
    stage regulators for both oxygen and acetylene Experience based on
    around ten different regulators over the years. Single stage BBQ
    fixed presure propane regulators work well too. Theoretically the
    flame shouldn't be as stable in size and mixture using  the cheap
    regulators but I have not noticed any problems. Replace the hose
    fittings to match the available french regulator and you should be
    set.  By the way NO acetylene regulator should ever output more than
    15 psi. 

Jeff Demand
Demand Designs
Analog/Digital Modeling & Goldsmithing
http://www.aztec-net.com/~jdemand


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________