[Jewelry making - Article 00849] - Re: [Orchid] Learning tension setting?

[Gerald]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


JSEllington

    If YOU can self teach pave' or channel set stones...good luck! I had
    a mentor/teacher for 6 years to teach me to do these very same
    things. Then I did only 9 more years to improve on these methods. No
    offence, "self teaching" is not the answer, you cannot ask a book
    questions. Neither can a book reply if you need personal assistance.
    "Thou shalt not be intimidated by the unknown". Once you learn by
    someone else, who is there with you, shall you learn...Picking
    gravers, grinding and shaping them will only allow you to be the
    best possible setter....but you should have someone to guide you.
    Gerry! 



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________