[Jewelry making - Article 00448] - Re: [Orchid] Wide Cuff Bracelet with Gemstone

[sandklrn]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hello!  Thanks for that bit of information tho it was meant for
    another. It is good info for me also.  I would like to do something
    like to shape a cuff, and then add embellishment cut-out designs.  I
    wasn't sure how to get the cut-out designs on without misshaping
    them.)  Can you describe a little further how I can do this .... I
    want to overlay horizontally on the cuff's surface 2 strips of flat
    wire, and then add a pieces of cut out metal designs, something like
    this -->  ~~~~~~~  vertically between the 2 strips.  The shape of the
    cuff will be "concave" (?)  - on the wrist it will look like this -> 
    )( (I hope it makes sense.would love help with this one.) 

Thanks Loads!



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________