The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Up to date way of setting stones  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Gerald
Date: Tue Feb 10 22:23:32 2004
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    To my respectful writer: "Flush Setting" a.k.a. "Gypsy Setting" is
    done only in one way...correctly.... the inside chased-over metal MUST
    be Bright-cut with a sharp graver. I use a Right-Sided, Onglette #2 
    tool that is modified just for this purpose, to Bright-cut any inside
    surface around the "Flush Set" stone. If not, you will have too much
    metal covering the diamond. All Flush-Set stones should have a
    smooth angled surface to reflect the Crown facets of the stone. As
    this will make the stone look larger than it is while it is covered
    with gold on the extreme girdle. One thing to watch out for is to
    have the diamonds' table just at the surface of the gold, AFTER emery
    cleaning, not before. The stone must be FLUSH, hence its name!
    Remember that if you folks are using a Flat Graver, the running of
    the graver will "hit" each of the  facets and then the graver will
    transfer these "hits" into a faceted edge around the inside
    wall...yuk! Hint: I make the stone just a tad lower at first setting,
    to allow for any severe filing and polishing an/or cleaning after!
    Gerry, the Cyber-Setter!!!!



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project