[Jewelry making - Article 00272] - Re: [Orchid] Using arrow heads in jewellery

[Karla Maxwell]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Regarding this thread: I also believe that the arrowhead would
    benefit from a backing that would support it during setting as well
    as keeping it snuggly in place while being worn over the years. 

    Rather than epoxy or a base made of rubber why not use our old
    friend JettSett? You can't find many materials that are so stable
    and can be manipulated while warm. It also has the advantage that it
    will conform to the contours of the arrowhead but will not stick to
    it. JettSett only sticks to itself. 

Orchid Rules!......Karla in sunny So. California


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________