[Jewelry making - Article 00249] - Re: [Orchid] 6 prong head needed

[coralnut]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Jay,  First let me comment that if the stone is as good as you
    say....anything from .50 up should be set in six prong
    platinum...not white gold.  Platinum will last much longer and is
    much safer than wg.  Stuller is an excellent source for such
    settings...  others on the net will provide you their favorite
    supplier I'm sure.  Cheers from Don at The Charles Belle Studio in
    SOFL where simple elegance IS fine jewelry! dcdietz AT comcast.net



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________