[Jewelry making - Article 00109] - Re: [Orchid] Ferric Nitrate source

[E. Luther]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    No, sorry, I haven't tried Ferric Chloride with Citric Acid on
    silver or read of anyone else doing that.  For resists I've used the
    Print Gocco screens with Rio Etch Master Resist (this is a thermal
    silkscreener) and Press 'n Peel Paper. 

    The time on the etching depends on temperature and how deep you want
    the etch.  Some results in as fast as an hour. 

Elaine Luther
Chicago area, Illinois, USA
Metalsmith, Certified PMC Instructor
Studio 925; established 1992
eluther AT copper.net


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________