[Jewelry making - Article 00068] - Re: [Orchid] Tumbling compound

[Janet Yang]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Some parts of this project have 18ga wires soldered together
    lengthwise. The groove between the two wires didn't get shiny, but
    the rest is very bright. This was after six hours of tumbling with
    Sunsheen ceramic balls. 

    What do I need to do next--add a smaller size of medium, change to a
    different type medium, or just tumble it longer? 

Janet


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________