[Jewelry making - Article 01154] - Re: [Orchid] Hot torch for propane

[Marilyn Smith]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Are you working with gold or silver? If you are working with silver,
    the torch you have is very good and what I use. The tip of the blue
    cone is the hottest part of the flame and is what should be in
    contact with your metal and in constant movement. Chain work is the
    only thing for which the smallest tip is hot enough. If the flame is
    getting smaller after you light it, I wonder if your gas tank is
    almost empty. You may need to turn up the pressure a bit on the
    regulator. 

Marilyn Smith



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________