[Jewelry making - Article 01127] - Re: [Orchid] CNC milling machine - Model Master

[PrecisionHawaii]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Aloha Martin, Though I have been an Applications / Technical
    Representative for Model Master, I started out as a customer. Using
    ArtCAM Pro (and now ArtCAM Jewels mith) with a Model Master 4 axis
    Mill, for the last 7 years or so, has been nothin g short of joy and
    amazement. I currently have 2 Model Master CNC mills. I sol d my 3rd
    CNC (another brand) to get a larger Model Master, the CNC 4000. Not
    o nly do I furnish training, support and sell the tech, I use it. 

    I regularly cut dies in T6 aluminum and cut directly in silver, gold
    and platinum. You are not limited by the Model Master machine, where
    you will be with many others. Only by type of material, chip load,
    the cutting tool and tool geometry, will you be limited on a mill
    that is up to the task. A lot of the mills out there don't have the
    accuracy, resolution, rigidity, power, nor pr oper spindle, to cut
    even good dies in Plexiglas, let alone metal. These are some things
    to consider when looking for a mill. Model Master has well over 750
    systems worldwide, and I would be happy to furnish references (10 at
    a time) , so you can speak to actual users. Actually there are many
    Model Master customer s here on Orchid and will probably chime in to
    share their experience. If I ca n answer any questions to help you
    make an educated decision or be of service, 

    please feel free to contact me. 

Best regards,
Christian



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________