[Jewelry making - Article 00356] - Re: [Orchid] Butane for torch

[Dave]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Jay, 

>     Not to be argumentative but I am known for debate, so please don't
>     be offended when I ask... A couple of Hours? Pardon my ignorance
>     but how much would I charge for fuel if I knew I had to go get
>     more in 2 hours. 

    Typically, folks who use butane torches have 1 or more canisters of
    fuel in the shop. When the fuel in the torch runs low, all that's
    required to refill it is to insert the nozzle of the refill canister
    into the torch. The refill time is less than 10 sec including
    getting the canister out of the drawer. 

    I use 4 different torches depending on the job, a Proxxon butane, a
    Bernz-o-matic propane pencil torch, an acetyline/air & a Smith
    Oxy/Propane Little torch. Each is better for some jobs than any of
    the others. 

Dave


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________