The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Speed Bumps  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Mark Shneyer
Date: Sat Jan 10 20:03:16 2004
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Speed bumps..Shots...Beads...ect.  They can be useful to help keep a
    ring from turning. Usually positioned  AT  5&7 o'clock. 

    For the most part I don't find them useful for arthritic hands
    because the knuckle is usually much larger than the finger. Since the
    ring must be able to fit over the knuckle with the "Shots" in there.
    That means the ring must be larger still to accomodate the room the
    shots take up. 

    Another consideration is that you will contaminate the platinum if
    you solder in the shots. I did notice one post that mentions fusing
    plat beads...a difficult job inside a 3mm band that has stones.  I
    would suggest soldering in platinum beads with either 900Plat plumb
    solder from PMWest or use as little as possible of white gold solder. 

    The cautions are consideration for future sizing needs...Should you
    need to weld the ring in the future.  A tiny amount of white gold
    solder could be easily ground out.  I do not suggest counter sinking
    the beads in any material since many customers want the shots removed
    down the road and/or the same considerations for future resizings
    always exists. 

Mark


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________


  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Blogs
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2009, The Ganoksin Project