[Jewelry making - Article 00222] - [Orchid] Enameling Kiln Recommendation Request

[Joel Elfman]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I am thinking of purchasing an enameling kiln for my apartment.  It
    is a hobby and I do not expect to make a living or doing mass
    production from this wonderful art at this time.  I would like still
    like a solid piece of equipment that would handle mostly jewelry,
    some small bowls, maybe something larger. 

    110 volts is preferable but I would look at 220 volts also.  I am
    investigating my wiring, hopefully the amperage is good and I can
    use what I got, otherwise I will be making the electrician rich.  

    I am also concerned about fumes, and although I know there are many
    who just recommend opening a window or using a fan.  Has anyone
    tried any commercial hood or other filtration arrangements? 

All recommendations are appreciated.

Joel


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________