[Jewelry making - Article 00174] - Re: [Orchid] Speed Bumps

[Tony Daniello]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Have used this many times. It works well as it creates just enough
    friction to help keep the ring from constantly flipping. 1.5- - 1.75
    mm balls are usually sufficient. Countersink them slightly (it will
    also help position them) with a ball bur They should be positioned at
     AT  8 and 4 o:clock. Too large of ball will change the finger size.


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________