[Jewelry making - Article 00828] - [Orchid] Scissors

[Frif]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    For many years I have used a pair of small, very tough scissors for
    cutting my solder and thin metal sheet. Their 48mm blades are strong
    and have kept their edge remarkably well.  

    I have a few favorite tools that should they be lost, I would not
    know how to replace.   These little scissors were one of them, Only
    last week did I find what these aRe: electricians scissors!  Very
    inexpensive - under $13 US., and come in two varieties, One plain
    blade and one with wire stripper notches.  Found them at a hardware
    store in electrical dept.  

    The reason I didn't know where they came from is that most of my
    studio was purchased from an estate.  A great deal, but after many
    years, there are still some things I have yet to identify!  It keeps
    life interesting <grin> 

Happy holidays to each of you.
Frif


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________