[Jewelry making - Article 00138] - Re: [Orchid] Resin Jewelry

[RCP]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    for what its worth. I tried running my epoxy and poly-esters through
    the vacuum caster and pulled a light vacuum , but stopped if it
    looked like it was running over and then started it again. Usually
    twice took all of the air and bubble out and it seems to set and up
    and look more "clear"when it hardens. It may be all worn, but it
    works for me. 



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________