[Jewelry making - Article 00126] - Re: [Orchid] Good ultrasonic for home

[mike fritz]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Dear David:

    L&R from 1983 is probably an "A" circuit that L&R used into the late
    80's. It is a good solid circuit and b ased on your wise use it should
    be with you unitl you retire. Two things kill ultrasonics. Dirty
    solutions left to run for weeks and turning the unit on at opening
    and not turning it off unitl you close the door.  OH!, another thing,
    not keeping the water level above the heater which will kill the
    heater very quickly. 

    Like Ken, Dale and I see a lot of abused ultrasonics to repair.  I
    agree with Ken that the Healthsonics is a good unit as we do warranty
    work for HS.  I have to add the ELMA machine (we do warranty work for
    them also) is a great machine, Ken I know you  will probably disagree
    but that makes horse races (grin). 

    Best wishes for a profitable holiday season 

Mike & Dale
Lone Star Technical Service


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________