[Jewelry making - Article 00096] - Re: [Orchid] Resin Jewelry

[Karen Christians]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


Hi Maggie and Susan:

    If you don't want to use a torch, a heat gun works very well. 
    Devcon 20 min is the epoxy of choice.  The colors do not shift very
    much at all.  But for your samples, the 5 minute works great. 

Have fun!


METALWERX 
School for the Jewelry and Metalarts
50 Guinan St.
Waltham, MA  02451
Ph:781/891-3854
FX:781/891-3857
www.metalwerx.com


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________