[Jewelry making - Article 00071] - Re: [Orchid] Hardening and Tempering Setting Tools

[Jewelryartschool]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Look in the archives. I wrote a pretty good description of what you
    need a few months back. It was also reposted on the AJM and Steve
    Lindsay sites. Called "Reconditioning Beading Tools" 

    Also wrote another on gravers that covers heating, bending,
    hardening, and tempering gravers -- but that was a few years back. I
    ran across it in the archives a couple weeks ago. If you cannot find
    this one I'll dig in my files and send it to you. 

    Look under the subjects, if that doesn't work, look under my name. 

Brian P. Marshall
Stockton Jewelry Arts School
2207 Lucile Ave.
Stockton, CA 95209
209-477-0550 Workshop/Studio/Classrooms


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________