[Jewelry making - Article 01361] - Re: [Orchid] Propane gas with natural gas torch

[John Sholl]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========



    I have been using a natural gas tip on my Hoke for years. During
    these years I have used both natural gas and propane, the tips work
    fine for both gasesand I personally like the multiple port form of
    the natural gas tips better than the single port. At this point i'm
    back to using propane even though there is a gas line in the wall
    behind my bench. I do a lot of platinum work and the propaneburns
    just a little hotter than the natural gas. Or maybe it has to do
    with the pressure? 

John Sholl


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________