[Jewelry making - Article 00989] - Re: [Orchid] Sunsheen

[Thackeray Taylor]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Janet, The Sunsheen Porcelain media we sell at Rio needs a break in
    because the media comes from the manufacture slightly porous. Because
    of this porosity the media is slightly abrasive when new. Running the
    media 4-7 days will "glaze" it over making it extremely smooth and
    hard. Also, put some silver scrap and a burnishing compound in with
    the media during the break-in cycle this will help the break-in
    period. One more note about porcelain burnishing media, the more you
    use it the better it performs. I hope this helps and thanks for your
    patronage! 

Thackeray Taylor
Rio Grande Technical Support.


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________