[Jewelry making - Article 00890] - Re: [Orchid] Left handed flex machines!

[John AT mlce.net]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Unless I am greatly mistaken, if you get this unit, you will have to
    find burr and bits that are cut in the opposite direction that
    "normal" ones are.  Could be very difficult to find these and if you
    do, they may be much more expensive. 

    Just a thought.. 

    John Dach 

    I am left handed and I just get used to the "wrong direction" tools.
    Been doing it for 55+ years. 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________