[Jewelry making - Article 00825] - Re: [Orchid] Left handed folks!

[James Binnion]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>        Hate to be the bearer of some bad news, for those who say that
>     there aren't any more left handed flex machines around....duh? 

    Gerry, Finding a motor that has left hand rotation is not the
    problem.  It is the burs and tools that are set up for right hand
    rotation. With left hand rotation you will only be able to use
    mounted grinding and polishing points any tool that has a screw
    thread or is used to cut like a bur or drill will not cut with left
    hand rotation. This is a fairly limiting factor for this most used
    tool. 

    Jim James Binnion Metal Arts Phone (360) 756-6550 Toll Free (877) 408
    7287 Fax (360) 756-2160 http://www.mokume-gane.com jbin AT mokume-gane.com 
    Member of the Better Business Bureau


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________