[Jewelry making - Article 00574] - Re: [Orchid] Quick polishing question

[Gerald]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Michael I suggest using a Dremmel, if you please with a pumice wheel,
    of 180 grit. try using a flat surfaced edge or a fine edge if you
    have to. there are no major clean-ups after wards..do not file, now
    this will be a problem for you...pumice wheels is the 'best' method
    for what you are looking for...Gerry, the Cyber-Setter!


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________