[Jewelry making - Article 00369] - [Orchid] Protecting ready for casting flasks

[Yolanda Rosales]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I am in the middle of casting and I have old equipment.  One of the
    bars that braces the crucible broke before I could complete any of
    the work....it's 1 AM and I will have to find a welder later in the
    day who can fix this.  Will leaving my "ready for casting" flasks on
    low in the kiln be the best thing to do to save them from damage or
    do you have a better solution.  I did try to find the answer in your
    archives but couldn't.  This is my first visit to your website. 

Thank you....Yolanda


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________