[Jewelry making - Article 00263] - Re: [Orchid] 330 vs. 2-ton epoxy

[Rick Copeland]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>     The best surface I've found for mixing epoxy (or for using any
>     glue, for that matter) is silicon.  I bought a square pad of
>     silicon (about 6"x6") from a vendor in Tucson that was intended
>     just for this purpose.

    You might want to check you local crafts store for a hot glue gun
    pad.  I remember my wife having one and it sounds very similar to the
    same product. 

Rick Copeland
Silversmith and Lapidary Artisan
Colorado Springs, Colorado
http://home.covad.net/~rcopeland


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________