[Jewelry making - Article 00126] - Re: [Orchid] Jump ringer systems

[Spiderchain Jewelry]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


>         Jan, The standard and long (high production) Jump Ringers will
>     cut from 30 to 12 guage wire. 

    I can easily cut 15ga (.0571), but for 14ga (.0641) I have to scoot
    the blade to slightly off center.  I haven't been able to get
    consistent cuts on anything larger - I often have to finish the cut
    with a hand saw.  What am I doing wrong?  I'd love to be able to
    tackle 12ga! 

-Spider (world's biggest Jump Ringer fan)


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________