[Jewelry making - Article 00086] - Re: [Orchid] Keum boo techniques

[kgoeller]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Janet, You're not getting anywhere near annealing temp on the
    burnisher, so it shouldn't be affected.  The reason for quenching it
    is to keep it significantly cooler than the silver and the gold
    foil, so that the foil will adhere to the silver, not the burnisher
    as it reaches that (relatively low) fusing temp.  

    So, no, the burnisher should not be adversely affected by using it
    for keum boo. 

Have fun,
Karen Goeller
kgoeller at nolimitations dot com
www.nolimitations.com


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________