[Jewelry making - Article 01385] - [Orchid] Pieces made of different metals

[Roland Gagnon]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    I am interested in starting to make pieces of different metal (ie.
    White and yellow gold together, etc.) and would like to know if
    anybody can refer me to a good book that would explain the process. 
    I know pieces have to be cast separately to then fit together, but I
    look at some pieces made of different metals and cannot figure how
    they are soldered together.  There must be ways that are better than
    others to carve the wax patterns so that once fitted together they
    can be easily soldered which will offer the best look. Any help would
    be helpful. Thank you. Roland Gagnon Saint John, NB, Canada 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________