[Jewelry making - Article 00410] - Re: [Orchid] Gas supply in home shop

[Jim Reitze]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    When I was in a house with city gas, I did just that.  No extra
    regulator, as the regulated line pressure into the house was very low
    to begin with.  I forget the exact figure, but if you were using
    bottle gas with a regulator, you would normally be running higher
    than city gas.  I found it adequate for all of my torch work. And
    appreciated not having to deal with bottles, or getting them filled. 
    It might not do for large scale soldering or melting/casting, but for
    making jewelry, it was more than adequate, and I have always had at
    least some fairly large silver pieces in my work. Jim 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________