[Jewelry making - Article 00186] - Re: [Orchid] Fusing silver safety

[Mark Shneyer]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========


    Hi Janet, Carbon monoxide is only a problem if you don't have proper
    ventilation. Example: Your furnace can present a problem if the flue
    is not clear and allows CO to accumulate in your house...everyone has
    a furnace in there house. The same thing goes with your range.
    Although there is not necessarily a hood or vent with a range, it is
    usually in a large open area and not used 24hrs a day. CO detectors
    are not expensive and they are recommended to accompany smoke
    detectors in homes.  A detector might also put your mind at ease
    should you decide to work indoors with a torch. 

Mark


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________